Please
check off the work that you would like performed. Prices
are for labor only unless otherwise noted . Materials,
sales tax, subcontracts, freight are extra and will be applied
accordingly. Prices are generally for boats under 40 ft
LOA; please call for estimates on larger boats.
Check here if owner will do all commissioning. (If we do
not commission the engine, unless otherwise instructed, we will tow your boat to a slip and bill you at our
general labor rate of $65.00 per hour.
Mechanical
Start up engine, check for leaks, water flow, check fluid
levels, check belts, hoses and clamps. All minor repairs
will be done automatically (extra) to save double start
up costs. All major repairs will be cleared with owner
before starting. (Rates do not include materials)
Diesel
Gasoline
(w/minor tuneup)
Single engine - $85
Twin engine - $150
Single engine - $90
Twin engine - $180
Commission
Generator - $60 (in conjunction with main engine)
SeaTrial boat after commissioning: (2 men minimum) - $150
Change fuel filters (per engine)
Change water pump impeller - $(T&Ms)
Change oil and filter (per engine) - $(T & Ms)
Install batteries - $(T&Ms)
Commission Water System under 40' - $150
Commission water system 40'+ - $(T&Ms)
Commission Heads (per toilet). - $25 (All Y-valves will be left in holding tank position.)
Commission
refrigeration system - per system - $(T& Ms)
Commission air conditioning system - per system - $(T&Ms)
Service Seacocks - $50 initial; $15 each additional
Install shaft zincs (excludes specialty zincs) - $25
Change lower unit oil in outdrive/outboard (each) - $60
Anti-foulant underwater metal: Single Screw -$150
Anti-foulant underwater metal: Twin - $225
Anti-foulant underwater metal: Single Outdrive - $250
Anti-foulant underwater metal: Twin Outdrives - $350
Change transmission fluid (per transmission) - $75
Check and lube steering system - $70
Step Mast - $(T&Ms)
Dockside tune mast 30'-35' boat - $150
Dockside tune mast 40' or larger - $175
Install sails - $(T&Ms)
Dockside tune mast to 30' boat - $100
Dockside tune mast 36'-40' boat - $175
Clean/ lube winches - $85 / winch
Install canvas - $(T&Ms)
Hull
Paint bottom (2nd coat half price) - $11/ft + materials (Select Paint Choice Below)
Interlux Micron Extra/Biolux (Best copolymer)
Interlux Nautical Epoxy Cop (Best Value mod. epoxy)
Interlux Fiberglass Bottomkot ACT (good ablative)
Interlux Nautical SuperAblative (Best value/performance copolymer)
Petit Trinidad (Best performing modified epoxy)
Prep & paint with owner materials - $13/ft
Machine compound hull - $18 to $22/ft
Wax hull - $11/ft
Varnish or oil teak - by quote
Other (all prices $T&M except as marked)
Repack stuffing boxes
Replace cutlass bearings
Align engine(s)
Rig Inspection - $300
General
instructions & other work requested